Professional Flooring Supply
Your Next Selections: |

Tile Tools & Equipment

|

Shop By Brand

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
The design of the DELTA LEVEL strips from RUBI, combined with the technical plastic material they are made of, ensure that whenever the levelling pressure is exerted, only the highest piece is lowered, avoiding the creation of air bubbles in the adhesive. The strips of the DELTA LS system allow tilers to work with any type of tile spacer, and thereby ensure the best levelling and positioning of ceramic tiles. Ideal for laying large format ceramic tiles (minimum size required: 30x30 cm.) by the back buttering technique. The design of the DELTA LEVEL SYSTEM strips allows them to be removed by impact (kick or mallet). Prevents the movement of parts when the adhesive is setting and improves the resulting surface flatness.3938Rubi Delta leveling System 1/16" Clips (Bag-400 un)
Login for more information
The design of the DELTA LEVEL strips from RUBI, combined with the technical plastic material they are made of, ensure that whenever the levelling pressure is exerted, only the highest piece is lowered, avoiding the creation of air bubbles in the adhesive. The strips of the DELTA LS system allow tilers to work with any type of tile spacer, and thereby ensure the best levelling and positioning of ceramic tiles. Ideal for laying large format ceramic tiles (minimum size required: 30x30 cm.) by the back buttering technique. The design of the DELTA LEVEL SYSTEM strips allows them to be removed by impact (kick or mallet). Prevents the movement of parts when the adhesive is setting and improves the resulting surface flatness.2839Rubi Delta Leveling System 1/32" Clips (Bag-400 un)
Login for more information
The design of the DELTA LEVEL strips from RUBI, combined with the technical plastic material they are made of, ensure that whenever the levelling pressure is exerted, only the highest piece is lowered, avoiding the creation of air bubbles in the adhesive. The strips of the DELTA LS system allow tilers to work with any type of tile spacer, and thereby ensure the best levelling and positioning of ceramic tiles. Ideal for laying large format ceramic tiles (minimum size required: 30x30 cm.) by the back butterin2851Rubi Delta Leveling System 1/32" Clips 3-12mm (Bag-200 un)
Login for more information
The design of the DELTA LEVEL strips from RUBI, combined with the technical plastic material they are made of, ensure that whenever the levelling pressure is exerted, only the highest piece is lowered, avoiding the creation of air bubbles in the adhesive. The strips of the DELTA LS system allow tilers to work with any type of tile spacer, and thereby ensure the best levelling and positioning of ceramic tiles. Ideal for laying large format ceramic tiles (minimum size required: 30x30 cm.) by the back butterin2870Rubi Delta Leveling System 1/32" Clips 3-12mm (Box-2400 un)
Login for more information
The design of the DELTA LEVEL strips from RUBI, combined with the technical plastic material they are made of, ensure that whenever the levelling pressure is exerted, only the highest piece is lowered, avoiding the creation of air bubbles in the adhesive. The strips of the DELTA LS system allow tilers to work with any type of tile spacer, and thereby ensure the best levelling and positioning of ceramic tiles. Ideal for laying large format ceramic tiles (minimum size required: 30x30 cm.) by the back buttering technique. The design of the DELTA LEVEL SYSTEM strips allows them to be removed by impact (kick or mallet). Prevents the movement of parts when the adhesive is setting and improves the resulting surface flatness.2869Rubi Delta leveling System 1/8" Clips (Bag-2400 un)
Login for more information
The design of the DELTA LEVEL strips from RUBI, combined with the technical plastic material they are made of, ensure that whenever the levelling pressure is exerted, only the highest piece is lowered, avoiding the creation of air bubbles in the adhesive. The strips of the DELTA LS system allow tilers to work with any type of tile spacer, and thereby ensure the best levelling and positioning of ceramic tiles. Ideal for laying large format ceramic tiles (minimum size required: 30x30 cm.) by the back buttering technique. The design of the DELTA LEVEL SYSTEM strips allows them to be removed by impact (kick or mallet). Prevents the movement of parts when the adhesive is setting and improves the resulting surface flatness.3943Rubi Delta leveling System 1/8" Clips (Bag-2400 un)
Login for more information
DRYGRES diamond drill bits are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite. This kit includes : Guide MUTLIDRILL, Band diamonds 28, 35, 43 and 68 mm, Band diamonds 28, 35, 43, 50 and 68 mm, Diamond holes of 6, 8, 20, 35, 50 and 68 mm, Rings of diamond 6 (x2), 20, 35 mm and diamond disc TCR-115 SUPERPRO, Mate case.5996Rubi Diamond Dry Cutting Drill Bits Kit GRYGRES
Login for more information
The range of DRYGRES diamond drills are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite. In the range of DRYGRES drills, RUBI has used the vacuum welding technology VACUUM BRAZED, which increases the resistance to temperature and friction, to fix the diamond particles to the cutting area. For drilling in dry wall, stoneware and porcelain tiles. Maximum operating speed 14,000 r.p.m. M14 thread finish. Usable with grinder (direct connection) or electric drill (adapter ref. 05976). Supplied in blister.5993Rubi Diamond DRYGRES Dry Cutting Drill Bit 1/4" (thread 5/8")
Login for more information
The range of DRYGRES diamond drills are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite. In the range of DRYGRES drills, RUBI has used the vacuum welding technology VACUUM BRAZED, which increases the resistance to temperature and friction, to fix the diamond particles to the cutting area.For drilling in dry wall, stoneware and porcelain tiles.5934Rubi Diamond DRYGRES Dry Cutting Drill Bit 3/4" (thread 5/8")
Login for more information
The range of DRYGRES diamond drills are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite. In the range of DRYGRES drills, RUBI has used the vacuum welding technology VACUUM BRAZED, which increases the resistance to temperature and friction, to fix the diamond particles to the cutting area.For drilling in dry wall, stoneware and porcelain tiles.5901Rubi Diamond DRYGRES Dry Cutting Drill Bit 3/8" (thread 5/8")
Login for more information
The range of RUBI manual diamond polishing pads is ideal for edge grinding and polishing, both for surface cuts of natural stone and ceramic tiles. The RUBI manual diamond polishing pads are semi-flexible diamond and their EVA body means they have excellent adaptation to the user's hand. The grip has a side slit that increases the ergonomics of the block and reduces hand fatigue during use. The manual diamond polishing pads are designed to work manually on those areas where access with electrical tools is very complicated, such as interior angles, hollow areas or corners and for roughing and smoothing of chipped or sharp edges.61975Rubi Diamond Manual Polishing Pad - Grit #120
Login for more information
The RUBI diamond rubber studs are semi-flexible and their EVA rubber body allows an excellent adaptation to the user's hand. The grip area has a lateral groove that increases the ergonomics of the block and reduces fatigue of the hand during use. The diamond rubber studs are designed to work manually on areas where access with power tools is very complicated, such as interior angles, hollow areas or corners and for roughing and smoothing chipped or sharp edges. In order to achieve a good result, both the type of material and the state in which it is found must be taken into account. RUBI diamond rubber studs can be used dry but wet use is recommended, either by moistening the plug or providing a source of continuous cooling. The range of RUBI diamond rubber blocks comes in different granulometries to perform different polishing and finishing tasks. It is very important that in the polishing work a stepwise degradation is carried out using the different grains successively, starting with the largest grain to the smallest. In the works of roughing and / or smoothing of edges, the movement of the block must go, always, from the top (most visible) to the bottom. This reduces the risk of chipping or material damage.61976Rubi Diamond Manual Polishing Pad - Grit #200
Login for more information
The RUBI diamond rubber studs are semi-flexible and their EVA rubber body allows an excellent adaptation to the user's hand. The grip area has a lateral groove that increases the ergonomics of the block and reduces fatigue of the hand during use. The diamond rubber studs are designed to work manually on areas where access with power tools is very complicated, such as interior angles, hollow areas or corners and for roughing and smoothing chipped or sharp edges. In order to achieve a good result, both the type of material and the state in which it is found must be taken into account. RUBI diamond rubber studs can be used dry but wet use is recommended, either by moistening the plug or providing a source of continuous cooling. The range of RUBI diamond rubber blocks comes in different granulometries to perform different polishing and finishing tasks. It is very important that in the polishing work a stepwise degradation is carried out using the different grains successively, starting with the largest grain to the smallest. In the works of roughing and / or smoothing of edges, the movement of the block must go, always, from the top (most visible) to the bottom. This reduces the risk of chipping or material damage.61977Rubi Diamond Manual Polishing Pad - Grit #400
Login for more information
The range of RUBI manual diamond polishing pads is ideal for edge grinding and polishing, both for surface cuts of natural stone and ceramic tiles. The RUBI manual diamond polishing pads are semi-flexible diamond and their EVA body means they have excellent adaptation to the user's hand. The grip has a side slit that increases the ergonomics of the block and reduces hand fatigue during use. The manual diamond polishing pads are designed to work manually on those areas where access with electrical tools is very complicated, such as interior angles, hollow areas or corners and for roughing and smoothing of chipped or sharp edges.61974Rubi Diamond Manual Polishing Pad - Grit #60
Login for more information
For drilling of all types of ceramic tiles, especially porcelain tiles, and other wall materials such as marble and granite, RUBI has the EASYGRES diamond drill bit range. The EASYGRES range are electroplated diamond drill bits for wet cutting, suitable for use with a non-percussive power drill. The quality of the diamond used in the design and manufacture of EASYGRES drill bits allows drilling of stoneware, porcelain tiles, granite, marble and glass.5942Rubi Drill Bit Easy Gres 1 1/8"
Login for more information
For drilling of all types of ceramic tiles, especially porcelain tiles, and other wall materials such as marble and granite, RUBI has the EASYGRES diamond drill bit range. The EASYGRES range are electroplated diamond drill bits for wet cutting, suitable for use with a non-percussive power drill. The quality of the diamond used in the design and manufacture of EASYGRES drill bits allows drilling of stoneware, porcelain tiles, granite, marble and glass.5965Rubi Drill Bit Easy Gres 1 3/4"
Login for more information
For drilling of all types of ceramic tiles, especially porcelain tiles, and other wall materials such as marble and granite, RUBI has the EASYGRES diamond drill bit range. The EASYGRES range are electroplated diamond drill bits for wet cutting, suitable for use with a non-percussive power drill. The quality of the diamond used in the design and manufacture of EASYGRES drill bits allows drilling of stoneware, porcelain tiles, granite, marble and glass.5941Rubi Drill Bit Easy Gres 20mm Wet Cut USA
Login for more information
For drilling of all types of ceramic tiles, especially porcelain tiles, and other wall materials such as marble and granite, RUBI has the EASYGRES diamond drill bit range. The EASYGRES range are electroplated diamond drill bits for wet cutting, suitable for use with a non-percussive power drill. The quality of the diamond used in the design and manufacture of EASYGRES drill bits allows drilling of stoneware, porcelain tiles, granite, marble and glass.5982Rubi Drill Bit Easy Gres 4-3/4"
Login for more information
DRYGRES diamond drill bits are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite. DRYGRES diamond drill bits are dry cutting and can be used directly with a grinder or electric drill without hammer, by using the drill adapter. The drilling depth of DRYGRES drill bits are 36 mm. For a better finish and longer life of the bit, it is important to respect the proper turning speed and perform a slight orbital ovement while drilling.5902Rubi DRYGRES 1-1/8" Diamond Drill Bit - thread 5/8"
Login for more information
DRYGRES diamond drill bits are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite. DRYGRES diamond drill bits are dry cutting and can be used directly with a grinder or electric drill without hammer, by using the drill adapter. The drilling depth of DRYGRES drill bits are 36 mm. For a better finish and longer life of the bit, it is important to respect the proper turning speed and perform a slight orbital ovement while drilling.5903Rubi DRYGRES 2" Diamond Drill Bit - thread 5/8"
Login for more information
DRYGRES diamond drill bits are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite. DRYGRES diamond drill bits are dry cutting and can be used directly with a grinder or electric drill without hammer, by using the drill adapter. The drilling depth of DRYGRES drill bits are 36 mm. For a better finish and longer life of the bit, it is important to respect the proper turning speed and perform a slight orbital ovement while drilling.5937Rubi DRYGRES 2-1/4" Diamond Drill Bit - thread 5/8"
Login for more information
DRYGRES diamond drill bits are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite. DRYGRES diamond drill bits are dry cutting and can be used directly with a grinder or electric drill without hammer, by using the drill adapter. The drilling depth of DRYGRES drill bits are 36 mm. For a better finish and longer life of the bit, it is important to respect the proper turning speed and perform a slight orbital ovement while drilling.5938Rubi DRYGRES 3" Diamond Drill Bit - thread 5/8"
Login for more information
Its powerful 3 HP motor makes the DS-250-N Laser&Level range by RUBI ideal for cutting and miter cuts of all types of ceramic tiles and especially porcelain tiles. Of course, the DS-250-N are also an ideal solution for cutting natural stones such as marble, granite, slate, etc. The DS-250-N Laser&Level has a motor assembly, mounted on sliding bearings, of maximum precision and cutting quality, which helps obtain perfect cuts. The aluminum structure of the DS-250-N by RUBI is lighter and offers high resistance to normal working conditions in construction. The DS-250-N works with 10 in. diameter blades (included). The system of retractable legs offers extra protection during transport and storage of the tile saw. And its built-in wheels facilitate handling and movement over short distances at the same site.52934Rubi DS250N-1300 ZERO DUST (3hp) 52"-10"blade(1"arbor)Laser&Lev 120V
Login for more information
Rubi Eggbeater Paddle 27"76908Rubi Eggbeater Paddle 27"
Login for more information
RUBI ENDURE scoring wheels are made of high-quality tungsten carbide. Its unitary grinding guarantees an exact and precise incision angle in all units. Thanks to its care and studied design, RUBI ENDURE scoring wheels are ideal for obtaining excellent cuts in ceramic tiles with a high cutting difficulty, especially for all ceramic materials with rough and/or structured surface finishes. The handle or stem of the RUBI ENDURE scoring wheels, has a triple groove (designed and patented by RUBI), which guarantees the user a correct assembly of the scoring wheel in the manual cutter. This geometry, exclusive to RUBI, ensures a firm fixation of the scoring wheel and a homogeneous scratch without vibrations.1903Rubi Endure Plus Scoring Wheel 5/16" (8mm)
Login for more information

Showing 326 - 350 of 552 Results

Resources

About Us

Policies

Contact Us
Store Locator

  • Connect With Us:

FSC Approved

Copyright © 2024 Professional Flooring Supply.  All rights reserved.