Your Next Selections: |

Adhesive Solutions

|

Shop By Brand

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
UZIN KE 24 PS is a water based, pressure sensitive adhesive suitable for the installation of all types of modular carpet tile, LVT and LVP, VET and vinyl-backed broadloom carpet. It provides a secure, releasable* adhesive bond and can receive light traffic immediately. Suitable for use over porous and nonporous substrates, UZIN KE 24 PS is easily applied by roller or trowel depending on the floor covering installation requirements.10226Uzin KE 24 Project Plus Pressure Sensitive Adhesive - Gal
Login for more information
UZIN KE 24 PS is a water based, pressure sensitive adhesive suitable for the installation of all types of modular carpet tile, LVT and LVP, VET and vinyl-backed broadloom carpet. It provides a secure, releasable* adhesive bond and can receive light traffic immediately. Suitable for use over porous and nonporous substrates, UZIN KE 24 PS is easily applied by roller or trowel depending on the floor covering installation requirements.10065Uzin KE 24 Project Plus Pressure Sensitive Adhesive 4 gal
Login for more information
HydraStix 95 Aerosol is a solvent-free aerosol adhesive recommended for difficult installations of commercial vinyl flooring and VCT where there is heavy traffic or rolling loads. It demonstrates highly aggressive grab and exceptional shear bond strength over other aerosol adhesives, and has tremendous moisture and plasticizer resistance.30856098XL Brands Hydrastix 95 Resilient Aerosol 22 oz.
Login for more information
Powerhold 500 is a brush/roller coat neoprene contact adhesive developed especially for bonding decorative plastic laminate to particle board in the manufacturing of counter tops. As a general purpose industrial type adhesive, PH 500 can be used for non-structural bonding of wood, metal, rubber, leather, canvas, rigid polyurethane foam, paper honeycomb and many other porous and non-porous surfaces.15018567Powerhold 500 Standard Contact Cement- Adhesive 1 Qt
Login for more information
POWERHOLD 5500 is a white acrylic cove base adhesive formulated for the installation of Rubber and Vinyl Cove Base over wood, concrete, brick, plaster, wallboard or other porous surfaces. Good wet suction for outside and inside corners. Will not contribute to staining, shrinkage or plasticizer migration.15016665Powerhold 5500 Acrylic Cove Base Adhesive 30 Oz
Login for more information
Premium High-Performance Polyurethane Carpet Tack Strip Adhesive949 10 OZPowerhold 949 Invisinail Construction Adhesive 10.5 Oz
Login for more information
TAG 100 is a very aggressive, high tack pressure sensitive adhesive engineered for the installation of a wide variety of resilient and modular floor covering types.

TAG 100 is solvent-free and offers excellent moisture, pH, and plasticizer resistance complementing its strong and durable bond between the recommended floor coverings ensuring a long-lasting installation.30025TAG 100 High Moisture Pressure Sensitive Adhesive - Gal
Login for more information
TAG 100 is a very aggressive, high tack pressure sensitive adhesive engineered for the installation of a wide variety of resilient and modular floor covering types.

TAG 100 is solvent-free and offers excellent moisture, pH, and plasticizer resistance complementing its strong and durable bond between the recommended floor coverings ensuring a long-lasting installation.29960TAG 100 High Moisture Pressure Sensitive Adhesive 4 Gal
Login for more information
TAG 200 brings a new standard to the market around transitional adhesives. TAG 200 is a very aggressive, high-tack transitional adhesive that installs like a pressure-sensitive adhesive but firms as it cures. Engineered for the installation of a wide variety of resilient and modular floor covering types, TAG 200 is solvent-free and offers excellent moisture, pH, and plasticizer resistance.29962TAG 200 High Moisture Transitional Pressure Sensitive Adhesive 4 Gal
Login for more information
TAG 200 brings a new standard to the market around transitional adhesives. TAG 200 is a very aggressive, high-tack transitional adhesive that installs like a pressure-sensitive adhesive but firms as it cures. Engineered for the installation of a wide variety of resilient and modular floor covering types, TAG 200 is solvent-free and offers excellent moisture, pH, and plasticizer resistance.30026TAG 200 High Moisture Transitional Pressure Sensitive Adhesive Gal
Login for more information
UZIN VCT 7 is a clear thin-spread adhesive that provides a fast, strong bond for VCT installations to receive light traffic immediately after placement. Suitable for use over porous and nonporous substrates (including well-bonded cutback adhesive residue), UZIN VCT 7 can be used in residential or commercial applications.10066Uzin Project Plus VCT Adhesive 4 Gal
Login for more information
HydraStix 95 Resilient is a high-strength, high-tack adhesive for installing multiple types of floor coverings such as vinyl tiles & plank, vinyl composition tiles (VCT), dimensionally stable vinyl plank, solid vinyl tile, cork, non-pvc backed carpet tile and vinyl sheet flooring over porous substrates.30856076XL Brands Hydrastix 95 Resilient 4 Gallon
Login for more information
Premium carpet adhesive for installation of all Mohawk backing systems30856146XL Brands Mohawk NuBroadlock Broadloom Adhesive 4 Gal
Login for more information
POWERHOLD 1500 VINYL COMPOSITION TILE ADHESIVE is a clear set, solvent free, pressure sensitive adhesive made for the interior installation of vinyl composition tile (VCT) and closed-cell foam-back hardwood parquet over approved substrates. This adhesive was formulated to be fast drying for quick installation. Tiles can be installed up to 24 hours after initial drying if the area remains dust and dirt free. POWERHOLD 1500 is a solvent-free, low-odor adhesive that meets all Federal, State and local government indoor air quality regulations. Do not use to install solid vinyl backed flooring.15018007Powerhold 1500 Clear Thin Spread VCT 4 Gal Adhesive
Login for more information
Powerhold 500 is a brush/roller coat neoprene contact adhesive developed especially for bonding decorative plastic laminate to particle board in the manufacturing of counter tops. As a general purpose industrial type adhesive, PH 500 can be used for non-structural bonding of wood, metal, rubber, leather, canvas, rigid polyurethane foam, paper honeycomb and many other porous and non-porous surfaces.15016150Powerhold 500 Standard Contact Cement Adhesive 1 Gal
Login for more information
POWERHOLD 5500 is a white acrylic cove base adhesive formulated for the installation of Rubber and Vinyl Cove Base over wood, concrete, brick, plaster, wallboard or other porous surfaces. Good wet suction for outside and inside corners. Will not contribute to staining, shrinkage or plasticizer migration.15017185Powerhold 5500 Acrylic Cove Base Adhesive 4 Gal
Login for more information
Premium High-Performance Polyurethane Carpet Tack Strip Adhesive949 30OZPowerhold 949 Invisinail Construction Adhesive 28 Oz
Login for more information
UZIN UZ 51 is the economical choice for direct glue-down broadloom carpet installation. Easily applied over a wide variety of substrates, it presents a quick initial green grab to ensure your floor coverings hold firmly and are permanently secure. On the job site, UZIN UZ 51 provides a suitable working time when working with most standard backing systems. UZIN UZ 51 can be used in residential or light commercial applications.10199Uzin Project Broadloom Carpet Adhesive - Gal
Login for more information
UZIN UZ 51 is the economical choice for direct glue-down broadloom carpet installation. Easily applied over a wide variety of substrates, it presents a quick initial green grab to ensure your floor coverings hold firmly and are permanently secure. On the job site, UZIN UZ 51 provides a suitable working time when working with most standard backing systems. UZIN UZ 51 can be used in residential or light commercial applications.10063Uzin UZ 51 Project Broadloom Carpet Adhesive 4 Gal
Login for more information
Dyna-Stix VCT is a solvent-free, water-based adhesive that dries translucent. Tiles may be laid into the adhesive for an extended period of time after drying. Aggressive tack permits installers to work off tiles. This low-odor adhesive can be used in occupied environments such as hospital, schools, nursing homes, hospitality and food preparation centers.30855588XL Brands Dyna Stix VCT High Moisture 95% RH 1 Gal
Login for more information
Gold Stix premium multi-purpose adhesive is designed for direct glue-down interior carpet installations, for bonding carpet to pad in double stick systems, and can also be used with mineral or fibrous-backed resilient sheet goods. Gold Stix quickly develops adhesive legging and forms a strong durable bond with most commercial broadloom carpets. The adhesive remains tacky for an extended period of time, has little odor and is environmentally friendly. Contains MicroSept  Antimicrobial System Protection for enhanced resistance to mold and mildew. Gold Stix is Cradle to Cradle Certified  at the GOLD level.30855606XL Brands Gold Stix Premium Multipurpose Adhesive 1 Gal
Login for more information
Gold Stix premium multi-purpose adhesive is designed for direct glue-down interior carpet installations, for bonding carpet to pad in double stick systems, and can also be used with mineral or fibrous-backed resilient sheet goods. Gold Stix quickly develops adhesive legging and forms a strong durable bond with most commercial broadloom carpets. The adhesive remains tacky for an extended period of time, has little odor and is environmentally friendly. Contains MicroSept  Antimicrobial System Protection for enhanced resistance to mold and mildew. Gold Stix is Cradle to Cradle Certified  at the GOLD level.30855605XL Brands Gold Stix Premium Multipurpose Adhesive 4 Gal
Login for more information
No matter what the project, 100% PVC free Roppe Pinnacle rubber base is ideal for the job. Pinnacle is the professional choice, because this SBR rubber base is highly durable and extremely flexible, allowing for easy installation.30OZEX600Roppe WB 600 Acrylic Wall Base Adhesive 30 Oz Ctg
Login for more information
DYNAGRIP 4000 SUBFLOOR is a premium grade construction adhesive specifically formulated for subfloor & deck installation. This easy-to-gun, solvent-based adhesive prevents floor squeaksand improves the structural performance of floor assembly when used properly. DYNAGRIP 4000 SUBFLOOR delivers a high-strength, weatherproof bond on wet, frozen & treated lumber.626-6340DAP Subfloor Construction Adhesive 10 Oz
Login for more information
DYNAGRIP 4000 SUBFLOOR is a premium grade construction adhesive specifically formulated for subfloor & deck installation. This easy-to-gun, solvent-based adhesive prevents floor squeaksand improves the structural performance of floor assembly when used properly. DYNAGRIP 4000 SUBFLOOR delivers a high-strength, weatherproof bond on wet, frozen & treated lumber.626-6357DAP Subfloor Construction Adhesive 29 Oz
Login for more information

Showing 1 - 25 of 212 Results

  • Connect With Us:

FSC Approved

Copyright © 2023 Professional Flooring Supply.  All rights reserved.