Choose Your Options

Product Listing

Sort by
Products per page
 ProductStockPrice 
This affordable moisture meter is specially designed for concrete, wood and masonry measurements. Non-Invasive Measurements, displayed on a digital LCD screen. Measure Depth of  1-1/4". Battery Operated 9V. Includes plastic carrying case.Floor Dot Wood & Concrete Moisture Meter
Login
for
Availability
Login
for
Price
Loba PU 280 Moisture Barrier 2.5 GalLoba PU 280 Moisture Barrier 2.5 Gal
Login
for
Availability
Login
for
Price
MM-100 is a water, solvent and VOC free, polyurethane-based moisture mitigation product used to treat concrete slabs with excessive moisture levels beyond what flooring adhesives allow. MM-100 can block moisture up to 20 lbs. MVER or 99% RH.Roppe Excelsior Moisture Mitigator MM-100
Login
for
Availability
Login
for
Price
Accelerator for use with UZIN PE 460 two component epoxy resin moisture vapor retarder. Used to accelerate cure time of epoxy and allow for fast track installation of floor coverings. For interior or exterior use.Uzin Epoxy Accelerator 2 Comp
Login
for
Availability
Login
for
Price
1-component surface strengthener, primer and moisture vapor retarder. Its fast drying polyurethane formula acts as a surface strengthener and consolidator on absorbent and non-absorbent substrates.Uzin PE 414 Turbo Rapid Prime Moisture Vapor Retarder 2.6 Gal
Login
for
Availability
Login
for
Price
A two component epoxy resin moisture vapor retarder for concrete substrates with high residual moisture. UZIN PE 460 can also be used as a surface hardener for absorbent substrates and as a bonding agent. For interior and exterior use.Uzin PE 460 Moisture Vapor Retarder Epoxy 2 Comp 2.5 Gal
Login
for
Availability
Login
for
Price
A two component epoxy resin moisture vapor retarder for concrete substrates with high residual moisture. UZIN PE 460 can also be used as a surface hardener for absorbent substrates and as a bonding agent. For interior and exterior use.Uzin PE 460 Moisture Vapor Retarder Epoxy 2 Comp Gal
Login
for
Availability
Login
for
Price
UZIN RR 185 loose laid sheet membrane is the ideal choice for fast, easy installation of various finish floor coverings. Unlike traditional liquid applied membranes, UZIN RR 185 does not require a mechanical concrete profile prior to its installation. With 100 % RH resistance, it can receive fl oor coverings in a greatly reduced time to that of wet applied mitigation products. This uncoupling sheet can be applied over contaminated and mixed substrates, making it perfect for both refurbishment and preservation projects. Existing substrates / coverings can easily be overlaid with new floor finishes, their subsequent replacement requiring mimimal effort or disruption. For interior and exterior use.Uzin RR 185 Uncoupling Sheet Moisture Mitigation Membrane 532.8 Sf
Login
for
Availability
Login
for
Price
Driseal 95 is an aqueous acrylic polymer that can be used on porous concrete substrates as a penetrating and film-forming sealer to protect against moisture readings up to 95% in-situ Relative Humidity (RH) and pH of 11.0. Driseal is a non-flammable, white emulsion which dries to a clear film that is alkali and water-resistant.XL Brands DriSeal 95/One Coat Vapor Seal 4 Gal
Login
for
Availability
Login
for
Price
Driseal 95 is an aqueous acrylic polymer that can be used on porous concrete substrates as a penetrating and film-forming sealer to protect against moisture readings up to 95% in-situ Relative Humidity (RH) and pH of 11.0. Driseal is a non-flammable, white emulsion which dries to a clear film that is alkali and water-resistant.XL Brands DriSeal 95/One Coat Vapor Seal Gal
Login
for
Availability
Login
for
Price
Liquishield100™ is a patented water-based copolymer product designed to treat interior moisture vapor emission (up to 100%RH) and protect against Alkalinity (up to 14pH) prior to installation  of moisture or alkaline sensitive floor coverings.Traxx Liquishield 100 Liquid Roll-on 100% RH Suppression 5 Gal
Login
for
Availability
Login
for
Price
Liquishield100™ is a patented water-based copolymer product designed to treat interior moisture vapor emission (up to 100%RH) and protect against Alkalinity (up to 14pH) prior to installation  of moisture or alkaline sensitive floor coverings.Traxx Liquishield 100 Liquid Roll-on 100% RH Suppression Gal
Login
for
Availability
Login
for
Price
LiquiDam EZ is a 1-part, highly-engineered, polymeric emulsion moisture mitigation formula. It is formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1,000 sf  per 24 hours (0.12 kg/m2  per 24 hours) or a maximum relative humidity of 100%. It is also designed to reduce the MVER from 25 lbs. to 3 lbs. per 1,000 sf  per 24 hours (0.015 kg/m2  per 24 hours). LiquiDam EZ is colored blue for visual assurance of coverage during the application process. Two coats are required to fully seal the substrate; and it quickly dries in as soon as 3-4 hours. Once dry, this product doesn’t require a primer before the application of TEC surface preparation products. LiquiDam EZ is a moisture vapor barrier for the installation of floor coverings, tile and stone. Ideal for use with other TEC adhesives, patch, underlayment, leveler and mortar products.TEC Liquidam EZ 5 Gal Unit
Login
for
Availability
Login
for
Price
LiquiDam is a low viscosity, high penetrating, two-part 100% solids epoxy. It is specially formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1,000sf  per 24 hours (0.12 kg/m2 per 24 hours) or a maximum relative humidity of 100%. It is designed to reduce the MVER to less than 3 lbs. per 1,000 sf per 24 hours (0.015 kg/m2 per 24 hours). LiquiDam is colored blue for visual assurance of coverage during the application process. Only one coat required to penetrate and fill voids and gaps to fully seal the substrate and quickly cures as soon as 4-5 hours to provide the benefit of same day installation. LiquiDam is a moisture vapor barrier for the installation of floor coverings, tile, stone and concrete toppings. Ideal for use with other TEC adhesive, patch, underlayment, leveler and mortar products.TEC Liquidam Unit Part A & B 1 Gal
Login
for
Availability
Login
for
Price
Traxx Traxxshield 100 Roll Moisture Barrier 40 Mil 200 Sf RollTraxx Traxxshield 100 Roll Moisture Barrier 40 Mil 200 Sf Roll
Login
for
Availability
Login
for
Price
Traxxshield installation tapes have zero telegraphing when installed beneath the seam. Gives added MVER protection at the seam lineTraxx Traxxshield 99 2" X 165' Tape
Login
for
Availability
Login
for
Price
Traxxshield installation tapes have zero telegraphing when installed beneath the seam. Gives added MVER protection at the seam lineTraxx Traxxshield 99 Double Stick Tape 36 Yd Roll
Login
for
Availability
Login
for
Price
Concrete must always be primed prior to installation. TraxxShield Primer is made for both porous and non-porous concrete surfaces.Traxx Traxxshield 99 Primer 5 Gal
Login
for
Availability
Login
for
Price
Concrete must always be primed prior to installation. TraxxShield Primer is made for both porous and non-porous concrete surfaces.Traxx Traxxshield 99 Primer Gal
Login
for
Availability
Login
for
Price
Traxx Traxxshield 99 Roll Moisture Barrier 40 Mil 200 Sf RollTraxx Traxxshield 99 Roll Moisture Barrier 40 Mil 200 Sf Roll
Login
for
Availability
Login
for
Price
With this versatile wireless device, you're set for quick, accurate readings of relative humidity (RH) and temperature when using either the Rapid RH 4.0 EX or 5.0 systems. In fact, collecting important data from either your Rapid RH 4.0 EX or 5.0 Smart Sensor has never been easier! Just tap a Bluetooth Smart Reader, about the size of a USB flash drive, to the Smart Sensor.Then for a fast, easy-to-read display, send your data wirelessly to one of two convenient apps available for download to your mobile device. The DataMaster 4.0/5.0 app, when paired with the bluetooth smart reader, serves as a comprehensive data integrity and data recording app designed specifically for use with either Rapid RH 5.0 or 4.0 EX sensors. Available on the app store.Wagner Rapd RH Bluetooth Smart Reader
Login
for
Availability
Login
for
Price
Knowing the importance of Rapid RH assessment tools, masonry and concrete trade professionals rely on the TE-CX (SDS Plus) Imperial Masonry Drill Bit.Wagner Rapid RH Drill Bit 3/4" Masonory Bit
Login
for
Availability
Login
for
Price
The Cleaning Brush was designed specifically for removing concrete debris before installing the Rapid RH Smart Sensors.Wagner Rapid RH Wire Brush
Login
for
Availability
Login
for
Price
Easily extend the Rapid RH L6 Sensor sleeve for deeper hole depths. Each extension add 1/2" to the smart sensor sleeve. Use multiple extensions for deeper holes.Wagner Smart Sensor Extension
Login
for
Availability
Login
for
Price
The Rapid RH 4.0 EX Insertion Tool is newly designed to provide simpler, more ergonomic Smart Sensor insertion for RH testing in concrete slabs with the Rapid RH test method. The new Insertion Tool is a more robust and extraordinarily useful multipurpose insertion tool that allows installers to know when they have a correctly-sized, straight, uniformly round test holes. Multi-stepped and multipurpose, the new insertion tool completely syncs with the current model Easy Reader for complete compatibility with the Rapid RH 4.0 EX systemWagner Smart Sensor Insertion Tool For 4.0 Sensor
Login
for
Availability
Login
for
Price

Showing 1 - 25 of 87 Results

  • Connect With Us:

FSC Approved

Copyright © 2020 Professional Flooring Supply.  All rights reserved.