Professional Flooring Supply
Choose Your Options

Product Listing

Sort by
Products per page
 ProductStockPrice 
Dyna Stix STP is a Silane Terminated Polymer wood flooring adhesive designed for use on high moisture bare concrete slabs. This high strength adhesive contains NO isocyanates and no solvents. Each pail comes with a clip on trowel designed for the perfect application of adhesive to achieve sound reduction or moisture protection. This high strength, non-slump formula holds perfect trowel ridges and cleans up easily prior to cure.XL Brands Dyna Stix STP 4 In 1 Wood Adhesive 4 Gal
Login
for
Availability
Login
for
Price
Stix 6010 is formulated with high tri-polymer content for the installation of engineered and acrylic impregnated wood plank as well as finished and unfinished solid wood flooring over a variety of substrates. Do not install over perimeter bonded flooring or rubber flooring. Closely follow NWFA guidelines when installing solid wood flooring directly to concrete substrates.XL Brands Stix 6010 Wood Flooring Adhesive 4 Gal
Login
for
Availability
Login
for
Price
Taylor MS Plus Advance Wood Adhesive 4 GalTaylor MS Plus Advance Wood Adhesive 4 Gal
Login
for
Availability
Login
for
Price
Taylor 2071 Tuff-Lok X-Link Wood Flooring Adhesive with Meta-Tec Technology, is a high solids, cross linking, AmideEster-Acrylate, resin-based adhesive formulated for the interior installation of dry-back parquet, engineered wood plank, acrylic impregnated plank, and pre-finished and unfinished solid wood flooring. It is solvent free, has a low VOC content, contains no hazardous chemicals as per OSHA Regulation CFR 1910.1200 and it is a nonflammable, low odor adhesive that meets all federal, state, and local governmental indoor air quality regulations. This specially formulated adhesive has good early strength buildup for immediate grab and gradually builds into a tenacious but resilient bond as the chemicals in the adhesive cross-link. Taylor 2071 can be used over association grade underlayment plywood, association grade particleboard underlayment, cork underlayments, existing well-bonded vinyl tile and sheet flooring, terrazzo, radiant heated subfloors where surface temperatures do not exceed 85 degrees F, and concrete.WF Taylor Tuff-Lok X-Link Wood Floor Adhesive - Gal
Login
for
Availability
Login
for
Price
3M Hardwood Repair Kit3M Hardwood Repair Kit
Login
for
Availability
Login
for
Price
Bostik Climb is a one-component, easy gunning, non-sag adhesive that is specifically formulated for hardwood flooring, planks and blocks on interior walls and installation of stair tread caps. The Climb formula has superior green grab (grab strength while wet) and cures quickly to form a tenacious bond. Once cured, Climb remains tough yet flexible for extreme durability, helps reduce stair squeaking, and reduces the sound of footsteps on the stairs. This specialty formulation is also easy to clean off of flooring, prefinished tread caps and risers even after cure. Climb has 0% solvents and low odor.Bostik Climb Hardwood Wall Plank & Tread Cap Adhesive - White 10oz
Login
for
Availability
Login
for
Price
Bostik EFA+™ is an easy-to-trowel urethane adhesive and moisture control membrane. It provides a tough, flexible, tenacious bond to a variety of surfaces. Its elastomeric characteristics allow EFA+™ adhesive to move with the wood as it expands and contracts over the life of the floor. Bostik EFA+™ exhibits a long open time making installation easier and faster. This adhesive has low VOC’s and does not contain any water.Bostik EFA+ Hardwood Adhesive & Moisture Control - 5 Gal
Login
for
Availability
Login
for
Price
Bostik EzPoxy EzClean is a 100% Solids Epoxy Mortar & Grout with outstanding application and clean up properties, in addition to superior chemical resistance.Bostik Greenforce Hardwood Adhesive & Moisture Control - 28 oz
Login
for
Availability
Login
for
Price
Bostik GreenForce® is a high performance hardwood flooring adhesive and moisture control membrane all in one. With Bostik’s breakthrough AXIOS® Tri-Linking™ Polymer Technol.ogy, GreenForce® maintains the superior long term durability and moisture protection properties of high-end urethane hardwood floor adhesive, but it is easier to spread and clean off of prefinished flooring, even after full cure.Bostik Greenforce Hardwood Adhesive & Moisture Control - 4 Gal
Login
for
Availability
Login
for
Price
MVP4 Moisture Vapor Protection is a one-part, trowel applied, moisture cure urethane membrane designed to be used beneath glue-down installations of engineered, solid and bamboo hardwood flooring. This is designed to minimize moisture vapor transmission from the subfloor, create a noise reduction barrier over the substrate, and establish an anti-fracture membrane that can bridge cracks that can occur in the substrate prior to or after installation (up to 1/8").Bostik MVP4 Moisture Vapor Protect, Anti-Fracture & Noise Reduc 5 Gal
Login
for
Availability
Login
for
Price
Pro-MSP is a hardwood and bamboo adhesive and moisture control membrane all in one. This adhesive formulation maintains long term durability and moisture control properties, and it is easy to spread and clean off of prefinished flooring before and after cure. This adhesive has low VOC's (as measured per EPA Method 24) and does NOT contain any water.Bostik Pro MSP Hardwood Adhesive Moisture Vapor Protect 4 Gal
Login
for
Availability
Login
for
Price
Bostik’s Pro-Cure is a professional grade, moisture-cure urethane adhesive for wood flooring; this adhesive does NOT contain any water. Pro-Cure may be used to adhere all engineered, acrylic impregnated, solid plank-flat milled, shorts, bamboo and parquet hardwood flooring designed and recommended in writing by the hardwood flooring manufacturer for glue-down applications. This adhesive can also be used to install plywood as described, as well as, ceramic tile, marble, and stone inlays for light commercial and/or residential applications. Pro-Cure may be used over all properly prepared substrates common to hardwood flooring installations including: concrete, plywood, OSB (underlayment grade), well-bonded ceramic tile, cement backer board, gypsum patch/underlayments (dry, above-grade), cement patch/underlayments, radiant-heat flooring, and terrazzo.Bostik Pro-Cure Hardwood Adhesive 4 Gal
Login
for
Availability
Login
for
Price
Ultra-Set® SingleStep2™ is a high performance adhesive, moisture control, and sound reduction membrane all in one. Bostik’s breakthrough AXIOS® Tri-Linking™ Polymer Technology used in this formulation maintains the superior long term durability, moisture control and sound abatement properties of high end urethane adhesives.Bostik Ultra-Set SingleStep2 Adh Moisture Control & Sound Reduct 4 Gal
Login
for
Availability
Login
for
Price
Bostik's Vapor-Lock is a high performance adhesive, moisture control, and sound reduction membrane all in one. Its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces, and it is not adversely affected by exposure to moisture, water or alkalinity. Vapor-Lock exhibits exceptional green grab or high tack immediately after troweling, making installation easier and more secure. This adhesive contains 1% recycled rubber material, has 0 VOC's (as calculated per SCAQMD Rule 1168) and does NOT contain any water. Vapor-Lock contains Bostik's BLOCKADE antimicrobial protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the cured adhesive.Bostik Vapor Lock Hardwood Adhesive Moisture & Sound Control 4 Gal
Login
for
Availability
Login
for
Price
Bostik's BEST is a high performance adhesive and moisture control membrane. Its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik's BEST high tacking formula exhibits exceptional green grab immediately after troweling, making installation easier and more secure. This adhesive has low VOC's (measured per EPA Method 24) and does NOT contain any water. Bostik's BEST contains Bostik's BLOCKADE antimicrobial protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried adhesive.Bostiks Best Urethane Adhesive Moisture Vapor Control 5 Gal
Login
for
Availability
Login
for
Price
DriTac has developed a "green" repair system to correct the hollow spots and popping conditions for engineered wood flooring installations when other adhesives fail to get the job done. These defects cost the flooring industry millions of dollars per year. Studies and experience show that a major cause of these problems for engineered wood floor installations are adhesive voids between the flooring and the subfloor.DriTac Repair Adhesive Gal
Login
for
Availability
Login
for
Price
DriTac has developed a "green" repair system to correct the hollow spots and popping conditions for engineered wood flooring installations when other adhesives fail to get the job done. These defects cost the flooring industry millions of dollars per year. Studies and experience show that a major cause of these problems for engineered wood floor installations are adhesive voids between the flooring and the subfloor.DriTac Solid Wood & Bamboo Repair Kit
Login
for
Availability
Login
for
Price
DriTac has developed a "green" repair system to correct the hollow spots and popping conditions for engineered wood flooring installations when other adhesives fail to get the job done. These defects cost the flooring industry millions of dollars per year. Studies and experience show that a major cause of these problems for engineered wood floor installations are adhesive voids between the flooring and the subfloor.DriTac Wood Floor Repair Adhesive Quart
Login
for
Availability
Login
for
Price
The DriTac Engineered Wood Floor Repair Kit is designed to correct and eliminate hollow spots and popping conditions for engineered wood floor installations. Major causes of these problems for engineered wood floor installations are adhesive voids between the flooring and subfloor, costing the flooring industry millions of dollars per year.DriTac Wood Floor Repair System
Login
for
Availability
Login
for
Price
Professional acrylic urethane adhesive for installing solid wood, engineered wood plank, wood parquet flooring, and cork underlayment.Henry 1171 Surelock Acrylic Urethane Adhesive - 1 Gal
Login
for
Availability
Login
for
Price
Professional acrylic urethane adhesive for installing solid wood, engineered wood plank, wood parquet flooring, and cork underlayment.Henry 1171N Surelock Acrylic Urethane Adhesive - 4 Gal
Login
for
Availability
Login
for
Price
HENRY 971 PlankPro is a one-part, moisture-cured, urethane wood adhesive designed for the installation of all manufacturers’ solid wood plank and strip (up to 1/2″ thick), wood parquet and engineered wood plank and strip in commercial and residential applications.Henry 971 PlankPro Moisture Cured Urethane Adhesive 3.5 Gal
Login
for
Availability
Login
for
Price
KILZ ORIGINAL Primer is a powerful stain blocking formula that blocks most heavy interior stains including water, smoke, tannin, ink, pencil, felt marker, grease, and also seals pet, food and smoke odors. May be top coated with latex or oil-based paint. Use on: wood, drywall, wallpaper or masonry.Kilz Original - Gal
Login
for
Availability
Login
for
Price
Solvent free, synthetic polymer based glue for gluing tongue and groove of floating wood flooring, chipboard, plywood and laminate floors.Loba D 6085 Tongue And Groove Glue
Login
for
Availability
Login
for
Price
Flexible, premium single component MS Polymer adhesive for the interior installation of 3/4 in"or less solid strip, lanks up to 4 in" wide of domestic North American species; engineered wood flooring with no limitations and Wakol Sound Underlayments. Can also be used as all-in-one adhesive with WAKOL B5 All in on blade for sound and moisture mitigation.Loba MS 230 Wood Florring Adh 3 Gal
Login
for
Availability
Login
for
Price

Showing 1 - 25 of 37 Results

Technical

About Us

Policies

Contact Us
Store Locator

  • Connect With Us:

FSC Approved

Copyright © 2018 Professional Flooring Supply.  All rights reserved.