Professional Flooring Supply

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
The RUBI diamond rubber studs are semi-flexible and their EVA rubber body allows an excellent adaptation to the user's hand. The grip area has a lateral groove that increases the ergonomics of the block and reduces fatigue of the hand during use. The diamond rubber studs are designed to work manually on areas where access with power tools is very complicated, such as interior angles, hollow areas or corners and for roughing and smoothing chipped or sharp edges. In order to achieve a good result, both the type of material and the state in which it is found must be taken into account. RUBI diamond rubber studs can be used dry but wet use is recommended, either by moistening the plug or providing a source of continuous cooling. The range of RUBI diamond rubber blocks comes in different granulometries to perform different polishing and finishing tasks. It is very important that in the polishing work a stepwise degradation is carried out using the different grains successively, starting with the largest grain to the smallest. In the works of roughing and / or smoothing of edges, the movement of the block must go, always, from the top (most visible) to the bottom. This reduces the risk of chipping or material damage.61977Rubi Diamond Manual Polishing Pad - Grit #400
Login for more information
The range of RUBI manual diamond polishing pads is ideal for edge grinding and polishing, both for surface cuts of natural stone and ceramic tiles. The RUBI manual diamond polishing pads are semi-flexible diamond and their EVA body means they have excellent adaptation to the user's hand. The grip has a side slit that increases the ergonomics of the block and reduces hand fatigue during use. The manual diamond polishing pads are designed to work manually on those areas where access with electrical tools is very complicated, such as interior angles, hollow areas or corners and for roughing and smoothing of chipped or sharp edges.61974Rubi Diamond Manual Polishing Pad - Grit #60
Login for more information
For drilling of all types of ceramic tiles, especially porcelain tiles, and other wall materials such as marble and granite, RUBI has the EASYGRES diamond drill bit range. The EASYGRES range are electroplated diamond drill bits for wet cutting, suitable for use with a non-percussive power drill. The quality of the diamond used in the design and manufacture of EASYGRES drill bits allows drilling of stoneware, porcelain tiles, granite, marble and glass.5942Rubi Drill Bit Easy Gres 1 1/8"
Login for more information
For drilling of all types of ceramic tiles, especially porcelain tiles, and other wall materials such as marble and granite, RUBI has the EASYGRES diamond drill bit range. The EASYGRES range are electroplated diamond drill bits for wet cutting, suitable for use with a non-percussive power drill. The quality of the diamond used in the design and manufacture of EASYGRES drill bits allows drilling of stoneware, porcelain tiles, granite, marble and glass.5965Rubi Drill Bit Easy Gres 1 3/4"
Login for more information
For drilling of all types of ceramic tiles, especially porcelain tiles, and other wall materials such as marble and granite, RUBI has the EASYGRES diamond drill bit range. The EASYGRES range are electroplated diamond drill bits for wet cutting, suitable for use with a non-percussive power drill. The quality of the diamond used in the design and manufacture of EASYGRES drill bits allows drilling of stoneware, porcelain tiles, granite, marble and glass.5941Rubi Drill Bit Easy Gres 20mm Wet Cut USA
Login for more information
For drilling of all types of ceramic tiles, especially porcelain tiles, and other wall materials such as marble and granite, RUBI has the EASYGRES diamond drill bit range. The EASYGRES range are electroplated diamond drill bits for wet cutting, suitable for use with a non-percussive power drill. The quality of the diamond used in the design and manufacture of EASYGRES drill bits allows drilling of stoneware, porcelain tiles, granite, marble and glass.5982Rubi Drill Bit Easy Gres 4-3/4"
Login for more information
DRYGRES diamond drill bits are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite. DRYGRES diamond drill bits are dry cutting and can be used directly with a grinder or electric drill without hammer, by using the drill adapter. The drilling depth of DRYGRES drill bits are 36 mm. For a better finish and longer life of the bit, it is important to respect the proper turning speed and perform a slight orbital ovement while drilling.5902Rubi DRYGRES 1-1/8" Diamond Drill Bit - thread 5/8"
Login for more information
DRYGRES diamond drill bits are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite. DRYGRES diamond drill bits are dry cutting and can be used directly with a grinder or electric drill without hammer, by using the drill adapter. The drilling depth of DRYGRES drill bits are 36 mm. For a better finish and longer life of the bit, it is important to respect the proper turning speed and perform a slight orbital ovement while drilling.5903Rubi DRYGRES 2" Diamond Drill Bit - thread 5/8"
Login for more information
DRYGRES diamond drill bits are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite. DRYGRES diamond drill bits are dry cutting and can be used directly with a grinder or electric drill without hammer, by using the drill adapter. The drilling depth of DRYGRES drill bits are 36 mm. For a better finish and longer life of the bit, it is important to respect the proper turning speed and perform a slight orbital ovement while drilling.5937Rubi DRYGRES 2-1/4" Diamond Drill Bit - thread 5/8"
Login for more information
DRYGRES diamond drill bits are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite. DRYGRES diamond drill bits are dry cutting and can be used directly with a grinder or electric drill without hammer, by using the drill adapter. The drilling depth of DRYGRES drill bits are 36 mm. For a better finish and longer life of the bit, it is important to respect the proper turning speed and perform a slight orbital ovement while drilling.5938Rubi DRYGRES 3" Diamond Drill Bit - thread 5/8"
Login for more information
Its powerful 3 HP motor makes the DS-250-N Laser&Level range by RUBI ideal for cutting and miter cuts of all types of ceramic tiles and especially porcelain tiles. Of course, the DS-250-N are also an ideal solution for cutting natural stones such as marble, granite, slate, etc. The DS-250-N Laser&Level has a motor assembly, mounted on sliding bearings, of maximum precision and cutting quality, which helps obtain perfect cuts. The aluminum structure of the DS-250-N by RUBI is lighter and offers high resistance to normal working conditions in construction. The DS-250-N works with 10 in. diameter blades (included). The system of retractable legs offers extra protection during transport and storage of the tile saw. And its built-in wheels facilitate handling and movement over short distances at the same site.52934Rubi DS250N-1300 ZERO DUST (3hp) 52"-10"blade(1"arbor)Laser&Lev 120V
Login for more information
Rubi Eggbeater Paddle 27"76908Rubi Eggbeater Paddle 27"
Login for more information
RUBI ENDURE scoring wheels are made of high-quality tungsten carbide. Its unitary grinding guarantees an exact and precise incision angle in all units. Thanks to its care and studied design, RUBI ENDURE scoring wheels are ideal for obtaining excellent cuts in ceramic tiles with a high cutting difficulty, especially for all ceramic materials with rough and/or structured surface finishes. The handle or stem of the RUBI ENDURE scoring wheels, has a triple groove (designed and patented by RUBI), which guarantees the user a correct assembly of the scoring wheel in the manual cutter. This geometry, exclusive to RUBI, ensures a firm fixation of the scoring wheel and a homogeneous scratch without vibrations.1903Rubi Endure Plus Scoring Wheel 5/16" (8mm)
Login for more information
RUBI ENDURE scoring wheels are made of high-quality tungsten carbide. Its unitary grinding guarantees an exact and precise incision angle in all units. RUBI ENDURE scoring wheels are ideal for obtaining excellent cuts in ceramic tiles with a high cutting difficulty, especially for all ceramic materials with rough and/or structured surface finishes (reliefs and textures ). Fits TX and TX-MAX tile cutters.1906Rubi Endure Plus Scoring Wheel 5/16" (8mm) for TS-TR-Speed-Fast-Star
Login for more information
EXTREME scoring wheels and rollers are made of high quality tungsten carbide, with a special titanium carbide coating. Thanks to this coating, RUBI EXTREME rollers and scoring wheels suffer less wear during use. But in addition, the EXTREME scoring wheels and rollers when mounted on a bearing, completely eliminates the friction of the wheel itself with the wheel shaft. This combination allows the behavior of the EXTREME scoring wheel to be much superior to the rest, offering a soft scratch and a life of 300%, compared to SILVER scoring wheels and rollers under the same conditions of use. Compatable with the RUBI range of cutters: TS-MAX, TR-MAGNET and SPEED-MAGNET. In addition, the EXTREME roller from RUBI is compatible with the TQ, TP-T and TP-S manual cutters, as well as the manual SLIM CUTTER for ceramic sheet cutting system from the SLAB SYSTEM product range.1901Rubi EXTREME Scoring Wheel 7/8" (22mm)
Login for more information
EXTREME scoring wheels and rollers are made of high quality tungsten carbide, with a special titanium carbide coating. Thanks to this coating, RUBI EXTREME rollers and scoring wheels suffer less wear during use. But in addition, the EXTREME scoring wheels and rollers when mounted on a bearing, completely eliminates the friction of the wheel itself with the wheel shaft. This combination allows the behavior of the EXTREME scoring wheel to be much superior to the rest, offering a soft scratch and a life of 300%, compared to SILVER scoring wheels and rollers under the same conditions of use. Compatable with the RUBI range of cutters: TS-MAX, TR-MAGNET and SPEED-MAGNET. In addition, the EXTREME roller from RUBI is compatible with the TQ, TP-T and TP-S manual cutters, as well as the manual SLIM CUTTER for ceramic sheet cutting system from the SLAB SYSTEM product range.1907Rubi Extreme Scoring Wheel 7/8" (22mm) for TS-TR-Speed-Fast-Star
Login for more information
FAST tile cutters are lightweight thanks to their new base, made of extruded aluminium, and are very versatile in cutting various types of ceramic tiles, due to their structural strength and breaking power. Generally suitable for cutting ceramic tiles, FAST tile cutters have a mobile breaker assembly, much more rigid and stable for easy scoring of the materials to be cut. Their POM sliders offer high rigidity and precision in scoring, while reducing friction with the guides. Available in two models, with cutting capacities of 25-1/2 in. and 33-1/2 in., respectively, FAST tile cutters include four lateral supports, fully adjustable to the position of the ceramic tile, offering the professional tile setter better securing and stability of the ceramic tile, especially in large formats.13940 Rubi FAST-65 25" Cutter
Login for more information
The FORAGRES kit is perfect for making holes in ceramic tiles during installation and allows professional ceramic tile installers to get the best results in their finishes. Diamond drillbits are ideal for drilling stoneware tiles, porcelain tiles and pieces of granite and marble. Kit consists of: a MULTIDRILL guide, a 0.32 gal. water tank and a manual water pump, a 6.7 ft. hose, 6 diamond drill bits (3/4, 1-1/8, 1-3/8, 1-3/4, 2, and 2-3/4 in. diam.) and a practical case.50903Rubi Foragres Kit (3/4",1-1/8",1-3/8" 1-3/4", 2" & 2-1/2")
Login for more information
The RUBI PRO-EDGER 45 diamond grinding wheels allow high-precision dry mitering to be performed on all types of ceramic tiles, natural, artificial, or sintered stone with thicknesses of up to 0.59" & 0.78" inches (15 or 20 mm), depending on the wheel model selected. Fine-grain wheels should be selected depending on the maximum thickness of the part: 15 or 20 mm.16985Rubi Grinding Wheel 45x15 cont. Fine Grit
Login for more information
The RUBI PRO-EDGER 45 diamond grinding wheels allow high-precision dry mitering to be performed on all types of ceramic tiles, natural, artificial, or sintered stone with thicknesses of up to 0.59" & 0.78" inches (15 or 20 mm), depending on the wheel model selected. The coarse grain of the TURBO TWIST wheel allows us to roughen the edge of the material more quickly before giving the final finish with a fine-grain wheel.16984Rubi Grinding Wheel 45x15 Turbo Twist C. Grain
Login for more information
The RUBI PRO-EDGER R range of diamond grinding wheels allows high-precision, blunt bevelling to be performed dry on all types of ceramic tile, natural, artificial, or sintered stone. The range is made up of varied wheels that allow obtaining blunt bevels of different radii, always, the best results. All the wheels in the RUBI PRO-EDGER range have a union of diamond grains through the "vacuum brazed" welding system that guarantees high resistance of the diamond particle, as well as high performance of the wheel. All RUBI PRO-EDGER diamond wheels are for exclusive use with the RUBI PRO-EDGER mini-grinder accessory. It is recommended to use RUBI PRO-EDGER wheels at speeds between 9,000 and 12,000 rpm.16957Rubi Grinding Wheel Pro Edger R5
Login for more information
Rubi Guides Kit TC-125 FOR REF:5195751969Rubi Guides Kit TC-125 FOR REF:51957
Login for more information
The transport system SLIM EASYTRANS is specially designed for the handling of porcelain sheets of large format and fine thickness up to 320 cm in length. The SLIM EASYTRANS can be used as a complement to the cutting systems for ceramic sheets: SLIM CUTTER and TC-125. It consists of a set of two extruded aluminum guides, retractable and adjustable from 160 to 320 cm. Thanks to the 10 suction cups, the setter can adjust the fixing points, ensuring the correct handling of the porcelain sheets. For a correct fixation of the system, we must check that the surface of the sheet is clean of dust or other debris. The suction cups of the SLIM EASYTRANS conveyor adapt to smooth surfaces as well as rough or slightly structured surfaces. The set has 4 handles (2 per guide) that can be adjusted and positioned over the entire length of the guide, facilitating and adapting the SLIM EASYTRANS at every moment to any format. The load capacity of the set is 60 kg. (standard equipment), but can be extended up to a maximum of 110 kg, incorporating, for each additional 10 kg, two additional suction cups.18819RUBI Holding Bar SLIM EASYTRANS (New)
Login for more information
The EASYGRES drill kits are the most economical solution for those users who need to make perforations of different diameters in all types of ceramic tiles. EASYGRES are diamond electrodeposited drills, wet cut, suitable for use with electric drill without hammer. The quality of the diamond used in the design and manufacture of the EASYGRES drill bits allows the drilling of stoneware, porcelain stoneware, granite, marble and glass. The EASYGRES guide allows holes to be made both on the ground and on the wall, thanks to the functional design of its water tank that incorporates a flow regulating tap. The guide adheres easily to any surface, thanks to its system of renewable adhesives.51919Rubi Kit Easy Gres Plus USA
Login for more information
Rubi Kit Mini Drygres 4 DRILL USA5968Rubi Kit Mini Drygres 4 DRILL USA
Login for more information

Showing 51 - 75 of 276 Results

Resources

About Us

Policies

Contact Us
Store Locator

  • Connect With Us:

FSC Approved

Copyright © 2023 Professional Flooring Supply.  All rights reserved.