 | 164.01.00 | Ceramic 3/set (replacement) w/fastners | Login for more information | |
 | 230 | Crain 230 Floor Scraper Deluxe | Login for more information | |
![This heavy-duty two inch wide blade is for use in the Crain No. 230 Deluxe Floor Scraper. It is made from .090" thick high carbon steel to hold its edge and withstand repeated impact. It is tough enough to force its way through glued-down flooring materials, and sharp enough to scrape up thick adhesive residues. Includes one each blade only. Net weight: 5 oz.](/images/ocw/cra231-thumbnail.jpg "This heavy-duty two inch wide blade is for use in the Crain No. 230 Deluxe Floor Scraper. It is made from .090" thick high carbon steel to hold its edge and withstand repeated impact. It is tough enough to force its way through glued-down flooring materials, and sharp enough to scrape up thick adhesive residues. Includes one each blade only. Net weight: 5 oz.") | 231 | Crain 231 Floor Scraper Deluxe Blade | Login for more information | |
![The Stand-Up Cutter slices glued-down carpet into narrow strips for faster removal, and works great for rapid rough cutting of carpet off the roll. It comes with a sharp, hardened steel point with a precision-machined slot for guiding a utility blade. The point easily punctures the glued-down carpet for fast starts. Afterwards, as the point is pushed, it rides on the subfloor and lifts the carpet to the utility blade where it is cut. The heavy-duty fiberglass handle telescopes in length from 50" to 85" to maintain optimal cutting angle, and double locks for safety.](/images/ocw/cra265-thumbnail.jpg "The Stand-Up Cutter slices glued-down carpet into narrow strips for faster removal, and works great for rapid rough cutting of carpet off the roll. It comes with a sharp, hardened steel point with a precision-machined slot for guiding a utility blade. The point easily punctures the glued-down carpet for fast starts. Afterwards, as the point is pushed, it rides on the subfloor and lifts the carpet to the utility blade where it is cut. The heavy-duty fiberglass handle telescopes in length from 50" to 85" to maintain optimal cutting angle, and double locks for safety.") | 265 | Crain 265 Jus Push Standup Cutter | Login for more information | |
 | 266 | Crain 266 Jus Push Replacement | Login for more information | |
![This hardened, high-carbon steel blade has two 10" long sharpened edges. When one edge of the blade wears out, the other side is still usable, which doubles blade life. This blade takes up a wider section of material for jobs where the floor comes up easily. Also works well for removal of adhesive residue and floor cleaning jobs. A sharp edge is ground to a 30? bevel on both sides. Works on Crain No. 700 or No. 710 stripper machines. Dimensions: 3" wide x 10" long x .079" thick.](/images/ocw/cra706d-thumbnail.jpg "This hardened, high-carbon steel blade has two 10" long sharpened edges. When one edge of the blade wears out, the other side is still usable, which doubles blade life. This blade takes up a wider section of material for jobs where the floor comes up easily. Also works well for removal of adhesive residue and floor cleaning jobs. A sharp edge is ground to a 30? bevel on both sides. Works on Crain No. 700 or No. 710 stripper machines. Dimensions: 3" wide x 10" long x .079" thick.") | 706D | Crain 3" X 10" D.E. M/P Blade | Login for more information | |
![This hardened, high-carbon steel blade has a 10" long sharpened edge for taking up a wider section of material on jobs where the floor comes up easily. Also works well for removal of adhesive residue and floor cleaning jobs. Sharp edge is ground to a 30? bevel on one side only. Works on Crain No. 700 or No. 710 stripper machines. Dimensions: 3" tall x 10" wide x .079" thick.](/images/ocw/cra705-thumbnail.jpg "This hardened, high-carbon steel blade has a 10" long sharpened edge for taking up a wider section of material on jobs where the floor comes up easily. Also works well for removal of adhesive residue and floor cleaning jobs. Sharp edge is ground to a 30? bevel on one side only. Works on Crain No. 700 or No. 710 stripper machines. Dimensions: 3" tall x 10" wide x .079" thick.") | 705 | Crain 3" X 10" Multi Purpose Blade | Login for more information | |
![This top quality hand stripper with 12" long handle has a zinc alloy head and blade clamp for extra durability. The blade clamp is fastened with three case hardened slotted head screws. The oversized vinyl grip has a rounded knob on top to fit comfortably in the palm. Comes with one No. 351 .020" thick floor stripper blade which works well for fine floor prep work such as adhesive removal.](/images/ocw/cra350-thumbnail.jpg "This top quality hand stripper with 12" long handle has a zinc alloy head and blade clamp for extra durability. The blade clamp is fastened with three case hardened slotted head screws. The oversized vinyl grip has a rounded knob on top to fit comfortably in the palm. Comes with one No. 351 .020" thick floor stripper blade which works well for fine floor prep work such as adhesive removal.") | 350 | Crain 350 Scraper 4" Blade | Login for more information | |
![This top quality hand stripper has a longer 20" handle for two handed operation and additional reach. The scraper head and blade clamp is made from a zinc alloy for extra durability. The blade clamp is fastened with three case hardened slotted head screws. The oversized vinyl grip has a rounded knob on top to fit comfortably in the palm. Comes with one No. 351 .020" thick floor stripper blade which works well for fine floor prep. work such as removal of adhesive residue](/images/ocw/cra360-thumbnail.jpg "This top quality hand stripper has a longer 20" handle for two handed operation and additional reach. The scraper head and blade clamp is made from a zinc alloy for extra durability. The blade clamp is fastened with three case hardened slotted head screws. The oversized vinyl grip has a rounded knob on top to fit comfortably in the palm. Comes with one No. 351 .020" thick floor stripper blade which works well for fine floor prep. work such as removal of adhesive residue") | 360 | Crain 360 Scraper 20" Handle | Login for more information | |
![This stand-up scraper takes a wide 8" blade for heavier removal work. The telescoping tubular handle adjusts in lengths from 39" to 59" using a simple twist-lock mechanism. The scraper head is steel-reinforced, and the blade clamp is fastened to the head using four case hardened slotted head screws. Great for stand-up scraping work, but not for use as a heavy-duty prying tool. Comes with one No. 376 heavy-duty .037" thick scraper blade, and a blade cover for storage. Replacement blades: No. 376 - 3 pack or No. 377 - 9 pack. Net weight: 4.6 lbs.](/images/ocw/cra375-thumbnail.jpg "This stand-up scraper takes a wide 8" blade for heavier removal work. The telescoping tubular handle adjusts in lengths from 39" to 59" using a simple twist-lock mechanism. The scraper head is steel-reinforced, and the blade clamp is fastened to the head using four case hardened slotted head screws. Great for stand-up scraping work, but not for use as a heavy-duty prying tool. Comes with one No. 376 heavy-duty .037" thick scraper blade, and a blade cover for storage. Replacement blades: No. 376 - 3 pack or No. 377 - 9 pack. Net weight: 4.6 lbs.") | 375 | Crain 375 Big Scraper | Login for more information | |
![This hand scraper has a metal knob handle that can be hammered with a rubber mallet to scrape up hard spots. The knob has rounded edges to fit the palm. Handle is 18" long for working effectively with both hands and for extra reach. Comes with a 5" wide blade with the same .037" thickness as our heavy-duty Big Scraper blades. The scraping head is steel-reinforced, and the blade clamp is fastened to the head with three case hardened slotted head screws. Replacement blades: No. 391. Net weight: 2 lbs.](/images/ocw/cra390-thumbnail.jpg "This hand scraper has a metal knob handle that can be hammered with a rubber mallet to scrape up hard spots. The knob has rounded edges to fit the palm. Handle is 18" long for working effectively with both hands and for extra reach. Comes with a 5" wide blade with the same .037" thickness as our heavy-duty Big Scraper blades. The scraping head is steel-reinforced, and the blade clamp is fastened to the head with three case hardened slotted head screws. Replacement blades: No. 391. Net weight: 2 lbs.") | 390 | Crain 390 Scraper Inertial | Login for more information | |
![This hardened, high-carbon steel blade for Crain stripper machines has a 6" long sharpened edge. Its stubby 4" width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs. The sharp edge is ground to a 30 degrees bevel on one side only. Works on Crain No. 700 or No. 710 stripper machines. Dimensions: 4" wide x 6" long x .079" thick. Net weight: 8 oz.](/images/ocw/cra701-thumbnail.jpg "This hardened, high-carbon steel blade for Crain stripper machines has a 6" long sharpened edge. Its stubby 4" width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs. The sharp edge is ground to a 30 degrees bevel on one side only. Works on Crain No. 700 or No. 710 stripper machines. Dimensions: 4" wide x 6" long x .079" thick. Net weight: 8 oz.") | 701 | Crain 4" X 6" Concrete Blade | Login for more information | |
![This hardened, high-carbon steel blade for Crain stripper machines has two 6" long sharpened edges. When one edge of the blade wears out, the other side is still usable, which doubles blade life. Its stubby 4" width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs. A sharp edge is ground to a 30 degree bevel on both sides. Works on Crain No. 700 or No. 710 stripper machines. Dimensions: 4" wide x 6" long x .079" thick.](/images/ocw/cra702d-thumbnail.jpg "This hardened, high-carbon steel blade for Crain stripper machines has two 6" long sharpened edges. When one edge of the blade wears out, the other side is still usable, which doubles blade life. Its stubby 4" width produces a stiffer blade that performs well on sheet vinyl and VCT removal jobs. A sharp edge is ground to a 30 degree bevel on both sides. Works on Crain No. 700 or No. 710 stripper machines. Dimensions: 4" wide x 6" long x .079" thick.") | 702D | Crain 4" X 6" D.E. Concrete Blade | Login for more information | |
![This hardened, high-carbon steel blade for Crain stripper machines has two 6" long sharpened edges. When one edge of the blade wears out, the other side is still usable, which doubles blade life. Its 5" width produces a blade with some degree of flex that performs well on glued-down carpet removal jobs. A sharp edge is ground to a 30? bevel on both sides. Works on Crain No. 700 or No. 710 stripper machines. Dimensions: 5" wide x 6" long x .079" thick.](/images/ocw/cra704d-thumbnail.jpg "This hardened, high-carbon steel blade for Crain stripper machines has two 6" long sharpened edges. When one edge of the blade wears out, the other side is still usable, which doubles blade life. Its 5" width produces a blade with some degree of flex that performs well on glued-down carpet removal jobs. A sharp edge is ground to a 30? bevel on both sides. Works on Crain No. 700 or No. 710 stripper machines. Dimensions: 5" wide x 6" long x .079" thick.") | 704D | Crain 5" X 6" D.E. R/B Blade | Login for more information | |
![This hardened, high-carbon steel blade for Crain stripper machines has a 6" long sharpened edge. Its 5" width produces a blade with some degree of flex that performs well on glued-down carpet removal jobs. The sharp edge is ground to a 30? bevel on one side only. Works on Crain No. 700 or No. 710 stripper machines. Dimensions: 5" wide x 6" long x .079" thick.](/images/ocw/noimage-thumbnail.jpg "This hardened, high-carbon steel blade for Crain stripper machines has a 6" long sharpened edge. Its 5" width produces a blade with some degree of flex that performs well on glued-down carpet removal jobs. The sharp edge is ground to a 30? bevel on one side only. Works on Crain No. 700 or No. 710 stripper machines. Dimensions: 5" wide x 6" long x .079" thick.") | 703 | Crain 703 5" x 6" Rubber Back Blade | Login for more information | |
| 707 | Crain 707 3" x 16" Wide Carpet Blade | Login for more information | |
| 708 | Crain 708 5" x 16" Floor Cleaner Blade | Login for more information | |
![The Crain Power Stripper features new Power Channel construction designed to force the blade forward with more focused energy. The oscillating cam action of the one horsepower motor is channeled straight ahead using steel channels and ball bearings. The blade carrier forms an ultra-low blade angle allowing the blade to get beneath the material to be removed. Angle adjustment is fast with the spring-loaded angle adjuster. Comes with a new heavy-duty 5 1/2" long x 3 1/8" wide x 1/4" thick Spud-Blade (No. 711) for light tile and wood removal. Also includes Crain No. 701 4" x 6" Vinyl Blade, Crain No. 705 3" x 10" Multi-Purpose Blade, and 35 lb. weight. Net weight: 127 lbs.](/images/ocw/cra710-thumbnail.jpg "The Crain Power Stripper features new Power Channel construction designed to force the blade forward with more focused energy. The oscillating cam action of the one horsepower motor is channeled straight ahead using steel channels and ball bearings. The blade carrier forms an ultra-low blade angle allowing the blade to get beneath the material to be removed. Angle adjustment is fast with the spring-loaded angle adjuster. Comes with a new heavy-duty 5 1/2" long x 3 1/8" wide x 1/4" thick Spud-Blade (No. 711) for light tile and wood removal. Also includes Crain No. 701 4" x 6" Vinyl Blade, Crain No. 705 3" x 10" Multi-Purpose Blade, and 35 lb. weight. Net weight: 127 lbs.") | 710 | Crain 710 Power Stripper | Login for more information | |
 | 711 | Crain 711 Spud Bar Blade For 710 | Login for more information | |
![This stand-up scraper takes a wide 8" blade for heavier removal work. The telescoping tubular handle adjusts in lengths from 39" to 59" using a simple twist-lock mechanism. The scraper head is steel-reinforced, and the blade clamp is fastened to the head using four case hardened slotted head screws. Great for stand-up scraping work, but not for use as a heavy-duty prying tool. Comes with one No. 376 heavy-duty .037" thick scraper blade, and a blade cover for storage. Replacement blades: No. 376 - 3 pack or No. 377 - 9 pack. Net weight: 4.6 lbs.](/images/ocw/cra718-main-53997-thumbnail.jpg "This stand-up scraper takes a wide 8" blade for heavier removal work. The telescoping tubular handle adjusts in lengths from 39" to 59" using a simple twist-lock mechanism. The scraper head is steel-reinforced, and the blade clamp is fastened to the head using four case hardened slotted head screws. Great for stand-up scraping work, but not for use as a heavy-duty prying tool. Comes with one No. 376 heavy-duty .037" thick scraper blade, and a blade cover for storage. Replacement blades: No. 376 - 3 pack or No. 377 - 9 pack. Net weight: 4.6 lbs.") | 718 | Crain 718 Power Scraper | Login for more information | |
![This hardened, high-carbon steel blade has a sharpened edge that is 3 1/2” wide for taking up a narrow section of material. It works well on tough take-up jobs by reducing resistance. Sharp edge is ground to a 30° bevel on one side only. Works on Crain No. 710 or No. 718 stripper machines. Dimensions: 3 3/4" tall x 3 1/2" wide x .079" thick. Net weight: 5 oz.](/images/ocw/cra719-thumbnail.jpg "This hardened, high-carbon steel blade has a sharpened edge that is 3 1/2” wide for taking up a narrow section of material. It works well on tough take-up jobs by reducing resistance. Sharp edge is ground to a 30° bevel on one side only. Works on Crain No. 710 or No. 718 stripper machines. Dimensions: 3 3/4" tall x 3 1/2" wide x .079" thick. Net weight: 5 oz.") | 719 | Crain 719 3-1/2" x 3-3/4" Thin Spud Blade | Login for more information | |
 | 844 | Crain 844 Pulling Claw | Login for more information | |
![This shorter version of the popular Big Scraper has a wide 8" blade for heavy removal work while kneeling. The telescoping tubular handle adjusts in lengths from 19" to 26" using a simple twist-lock mechanism. The scraper head is steel-reinforced, and the blade clamp is fastened to the head using four case hardened slotted head screws. Great for scraping wide sections of material from a kneeling position, but not for use as a heavy-duty prying tool. Comes with one No. 376 heavy-duty .037" thick scraper blade, and a blade cover for storage. Replacement blades: No. 376 - 3 pack or No. 377 - 9 pack.](/images/ocw/cra375s-thumbnail.jpg "This shorter version of the popular Big Scraper has a wide 8" blade for heavy removal work while kneeling. The telescoping tubular handle adjusts in lengths from 19" to 26" using a simple twist-lock mechanism. The scraper head is steel-reinforced, and the blade clamp is fastened to the head using four case hardened slotted head screws. Great for scraping wide sections of material from a kneeling position, but not for use as a heavy-duty prying tool. Comes with one No. 376 heavy-duty .037" thick scraper blade, and a blade cover for storage. Replacement blades: No. 376 - 3 pack or No. 377 - 9 pack.") | 375S | Crain Scraper Adjustable Handle | Login for more information | |
![This wider three inch wide blade for the No. 230 Deluxe Floor Scraper takes up wider sections of material. It is made from .090" thick high carbon steel to hold its edge and withstand repeated impact. It is tough enough to force its way through glued-down flooring materials, and sharp enough to scrape up thick adhesive residues. Includes one each blade only.](/images/ocw/cra232-thumbnail.jpg "This wider three inch wide blade for the No. 230 Deluxe Floor Scraper takes up wider sections of material. It is made from .090" thick high carbon steel to hold its edge and withstand repeated impact. It is tough enough to force its way through glued-down flooring materials, and sharp enough to scrape up thick adhesive residues. Includes one each blade only.") | 232 | Crain Scraper Blade Deluxe For #230 | Login for more information | |
![Pack of ten replacement blades for the Crain No. 390 Inertial Scraper. These wide 5" blades are made with the same .037" thickness as our heavy-duty Big Scraper blades. These stout blades can be used to scrape up hard spots. They come in a plastic vial of ten blades with a resealable cap. Dimensions: 5" long, .750" wide, .037" thick.](/images/ocw/cra391-thumbnail.jpg "Pack of ten replacement blades for the Crain No. 390 Inertial Scraper. These wide 5" blades are made with the same .037" thickness as our heavy-duty Big Scraper blades. These stout blades can be used to scrape up hard spots. They come in a plastic vial of ten blades with a resealable cap. Dimensions: 5" long, .750" wide, .037" thick.") | 391 | Crain Scraper Inertial Blades 10 Ct | Login for more information | |
