Uzin NC 890 HydroPatch 10Lb

Data Sheet
SDS 10 lbs per Each
160 per Pallet 1/8"(3 mm): up to 28 sq. ft. (2.6 m²)
skim coat: 300 – 350 sq. ft. (27.8 m²) - Interior and exterior use
- Use beneath UZIN moisture mitigation products
- Use beneath moisture resistant adhesives and floor coverings*
- Use over properly prepared concrete substrates up to 100% RH and pH of 14
- Heavy wear in domestic and commercial locations including exposure to caster wheels
- Covering gypsum concrete or concrete subfloors with existing ceramic tile, stone, and terrazzo
- Use over thin, well-bonded, and primed adhesive residues including cutback
- Covering plywood and OSB (APA rated)
- Radiant floor heating systems (hydronic or electric)
- Over new or old cement leveling compounds
- Over existing substrates with well-bonded, non-water-soluble, primed adhesive residues
- Covering large and small format tile and natural stone
- Use as a system component in high-speed construction
* Depending on floor covering and adhesive manufacturer allowances. - Advanced moisture resistant technology | Easily skim coat over concrete substrates with high RH % moisture values*
- Fast dry formula | Coverings can be installed in as little as 30 minutes
- High strength | Compressive strength in excess of 3000 psi (in air at 28 days) Castor wheel resistant at 1/8” (3 mm)
- Very fine aggregates | Trowel from a true feather edge up to 1/2" (12.5 mm)
- Variable water range | Adjustable consistency within UZIN requirement
- Smooth surface finish | Maximum adhesive coverage
- No primer required* | Labor/cost savings
- Excellent absorbency | Enhanced adhesive bond characteristics
- Versatile product | Easily handles most substrate deficiencies
- Compliant with CDPH/EHLB/Standard Method Version 1.2, 2017 (emission testing method for CA specification 01350) | Protects the environment, LEED v4 contributing product (low emitting materials)
* See "Substrate Preparation" in Tech Data for additional information.