Professional Flooring Supply - TEC Liquidam Unit Part A & B 1 Gal,TEC Liquidam Unit Part A & B 1 Gal

LiquiDam is a low viscosity, high penetrating, two-part 100% solids epoxy. It is specially formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1,000sf per 24 hours (0.12 kg/m2 per 24 hours) or a maximum relative humidity of 100%. It is designed to reduce the MVER to less than 3 lbs. per 1,000 sf per 24 hours (0.015 kg/m2 per 24 hours). LiquiDam is colored blue for visual assurance of coverage during the application process. Only one coat required to penetrate and fill voids and gaps to fully seal the substrate and quickly cures as soon as 4-5 hours to provide the benefit of same day installation. LiquiDam is a moisture vapor barrier for the installation of floor coverings, tile, stone and concrete toppings. Ideal for use with other TEC adhesive, patch, underlayment, leveler and mortar products.

Description:

LiquiDam is a low viscosity, high penetrating, two-part 100% solids epoxy. It is specially formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1,000sf per 24 hours (0.12 kg/m2 per 24 hours) or a maximum relative humidity of 100%. It is designed to reduce the MVER to less than 3 lbs. per 1,000 sf per 24 hours (0.015 kg/m2 per 24 hours). LiquiDam is colored blue for visual assurance of coverage during the application process. Only one coat required to penetrate and fill voids and gaps to fully seal the substrate and quickly cures as soon as 4-5 hours to provide the benefit of same day installation. LiquiDam is a moisture vapor barrier for the installation of floor coverings, tile, stone and concrete toppings. Ideal for use with other TEC adhesive, patch, underlayment, leveler and mortar products.

Item #:
15036204

UOM:Each
Availability:Login for Availability

Quantity:

Ask Question Tell a Friend

Product Information

Data Sheet
SDS

Packaging

Two part system components (packaged in a carton) as follows:
Part A: .67 gallon (2.5 L) in two jugs inside a 2 gallon pail
Part B: .33 gallon (1262 mL) plastic jug

Coverage

LiquiDam requires only one coat with a typical coverage rate of 150 sf per blended gallon (3.7 m2/L).
Coverage will vary depending on surface profile and porosity, ranging from 100-180 sf per blended gallon (2.5-4.4 m2/L).
The finished application must cover the substrate completely without any voids or pinholes to ensure moisture vapor suppression.

Documentation:

No documents available.

Data Sheet
SDS

Packaging

Two part system components (packaged in a carton) as follows:
Part A: .67 gallon (2.5 L) in two jugs inside a 2 gallon pail
Part B: .33 gallon (1262 mL) plastic jug