Professional Flooring Supply
  • Home
  • Carpet Materials
Your Next Selections: |

Carpet Material Solutions

|

Shop By Brand

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
Crain 154 - Narrow Stair Tool154Crain 154 - Narrow Stair Tool
Login for more information
Replacement part for Crain 545 Multi-Undercut Saw1545-KCrain 1545K Brush Set 2
Login for more information
The bent blade of this stair tool is helpful when it is necessary to tuck carpet under toe spaces. It is also helpful for tucking carpet underneath Z-bar and under heat registers. The smooth tapered blade will not snag or cut the carpet. The four inch blade tucks a wide section of carpet each time it is malleted. Forged from an impact-resistant steel alloy, and nickel plated. Net weight: 1 lb.155Crain 155 - Bent Stair Tool
Login for more information
The notched carpet spreader is made from flexible steel. It can be used to press and hold the carpet in the gully at the tack strip while the stretch is released. This causes the carpet's backing to set better on the pins of the tack strip. The blade of this spreader is flexible enough that it can also be used in tight spaces as a glue spreading trowel. Notches are 1/16 inch x 1/16 inch "U"-type. The blue plastic handle is ergonomically contoured. Blade width: 12 inches. Net weight: 8 oz.161Crain 161- Carpet Spreader
Login for more information
The plain carpet spreader is made with thicker 16 gauge plated steel without notches. It holds the carpet on the tack strip as the stretch is released for better setting of the pins into the carpet's backing. With no notches, the tool makes a better tucking tool. Push it down the wall with pressure on the handle, and it tucks the carpet without catching yarns. The thicker blade does not bend under load. The black plastic handle is ergonomically contoured. Blade width: 10 inches. Net weight: 8 oz.162Crain 162 - Carpet Spreader Plain
Login for more information
This long-nosed hammering tool extends beneath toe-spaces and other low clearance areas to drive tack strip nails and other nails into the subfloor. The hammering tip is magnetized to temporarily hold a nail in position. The forged alloy steel body includes a bonded rubber-like handle that reduces impact vibration from the hammer being transmitted to the hand and wrist. Net weight: 5 lbs.166Crain 166 - Magnetic Drive Bar
Login for more information
This tool has a precision magnetic tip that can hold nails in position so they can be driven into areas where it would be difficult with fingers only. Works well driving hard to hold stubby nails into the tack strip when fastening strip to concrete, for example. The tool's body is made from a 5 1/2" long stainless steel body with a powerful magnetic insert on one end and the hammering head on the other.172Crain 172 - Magnetic Tack Holder
Login for more information
This tool cuts a three inch diameter circle for removing stained areas from a carpet. Four blades mount on the body to make clean cuts. The sharp central pivot pin is spring-loaded to adjust automatically to different thicknesses of carpet. The solid aluminum body includes finger contours for gripping. Includes plastic cap to protect the body and pin in storage. Blades: 1174-A174Crain 174 - Cookie Cutter Instant Re-tool
Login for more information
These seam squeezers are made with a powerful torsion spring and two grippers that are oriented inwardly to pull seams together. Sold in a set of two. They are helpful on glue-down carpet installations to pull and hold seams together. Pulling force can be controlled with the amount of hand pressure. The spring arms are vinyl-coated for comfort. Nap grips are replaceable: Part No. 1180-A. Net weight: 3 lb./set180Crain 180 - Seam Squeezer Set
Login for more information
Our big loop nap shears have offset handles with oversize loops for users with large fingers. The offset handles are easily held parallel with the floor for trimming off the tops of carpet tufts. The flat duckbill rides on top of the carpet to position the top blade at the proper height. The right side loop accommodates two fingers for ease of activation of the top blade. Handles are vinyl-coated for ease of grip. Net weight: 6 oz.187Crain 187 Big Loop Nap Shears
Login for more information
These duckbill nap shears have offset handles with smaller one inch loops for precision control. The offset handles are easily held parallel with the floor for trimming off the tops of carpet tufts. The flat duckbill rides on top of the carpet to position the top blade at the proper height. Handles are vinyl-coated for ease of grip.190Crain 190 Napping Shears
Login for more information
The turning tool has a bent leg for tucking carpet under "Z" Bar. Push the point to the back of the "Z" bar, then run the point down the length. The tool will tuck as it moves along the "Z" bar. The angled leg offsets the handle from the floor to keep knuckles from rubbing on the carpet. The tool is also useful for light carpet stretching in cramped areas, such as around toilets. Insert the sharp high carbon steel point into the tackless strip and lift to stretch. Net weight: 3 oz192Crain 192 Turning Tool
Login for more information
The sharp, high-carbon steel point penetrates the carpet's backing for fast removal from the tack strip. It can also be used for light carpet stretching in tight areas, such as around toilets. Press the point into the tack strip and lift to stretch the carpet. The point has an opposite flat end seated in the top of the hard plastic handle for hammering when necessary. Handle is rounded to fit the palm comfortably. Net weight: 3 oz.195Crain 195 Carpet Awl
Login for more information
Crain 203 Glue Gun203Crain 203 Glue Gun
Login for more information
Crain 204 Hot Glue Gun204Crain 204 Hot Glue Gun
Login for more information
Crain 207 Glue Gun High Temp 220W207Crain 207 Glue Gun High Temp 220W
Login for more information
Crain 223 1/8" Carbide Bit223Crain 223 1/8" Carbide Bit
Login for more information
Crain 224 3/16" Carbide Bit224Crain 224 3/16" Carbide Bit
Login for more information
Crain 225 1/8" Hex Adaptor225Crain 225 1/8" Hex Adaptor
Login for more information
This tool trims excess carpet at the wall leaving just the right amount for tucking between the base board and the tackless strip. The deluxe trimmer has top-loading blade carriers that make blade changes faster and easier. The wide open throat area allows carpet to enter and flow smoothly to the blades. This reduces wadding of carpet and resistance to cutting. Comes with six shims for adjustment of cutting height and four throat adjustments for different carpet thicknesses. Wall runner is angled outward to minimize wall contact and includes a replaceable wall protector pad to prevent marking. Blades: Crain No. 184.245Crain 245 Deluxe Wall Trimmer
Login for more information
This tool trims excess carpet at the wall, leaving just the right amount for tucking between the base board and the tackless strip. With this trimmer, blades are easily changed by removing the blade carrier. Once the blade carrier is removed, the blades are accessible from the top of the blade carrier. To reinsert the blade carrier, insert one of the pointed edges into a relief in a shim and lift the blade carrier to separate the shims. For throat adjustment, as the blade carrier is reinserted, locate the blade carrier dimples into any of four sockets formed on every shim. Six shims are provided for blade height adjustment, and each shim includes four sockets for throat adjustment.246Crain 246 Quick Change Trimmer
Login for more information
This trimmer has a rounded wall runner which allows it to trim vinyl sheetgoods net to the wall. The tool can also trim cut pile carpets. When trimming vinyl, the tool comes with an anti-friction boot to prevent it from scratching. The spring-loaded center knob for height adjustment is easy to use. Takes either slotted razor blades or hook blades. Slotted razor blades work well on vinyl, while hook blades work well on cut pile carpet. Blades: Crain No. 308 Slotted Razor Blades or Crain No. 996X Hook Blades.247Crain 247 Wall Trimmer
Login for more information
This cutter excels on zigzag ("hydra-shift") carpets including commercial loop pile and Berbers! The blade runs directly behind the center row guide. This keeps the blade away from the offset yarns, preventing yarns from being sheared, which causes unsightly seams. The wide base keeps the blade perpendicular to the yarns, further reducing nap shear. The row guide can be retracted fully into the base for top cutting. The tool can also be used as a trimmer to precisely trim carpet up to Z-bar or vinyl molding.290Crain 290 Seam Cutter Plus
Login for more information
Includes a pack of 10 blades for the discontinued Crain No. 298 Top Cutter. When used with the Top Cutter, this elongated blade can double cut carpet from the face. For use with the Crain No. 298 Top Cutter only. Blade dimensions: length: 3.00", width: .745", thickness: .025".299YCrain 299Y Replacement Blades For 299 (10 Per Tube)
Login for more information
These 3 inch long 16 gauge straight sewing needles are made for carpet seaming. They are rounded on the eyelet end, and sharp on the other. These needles are sold in a pack of 25 needles only.762Crain 3" Needles (25/pk)
Login for more information

Showing 126 - 150 of 540 Results

Resources

About Us

Policies

Contact Us
Store Locator

  • Connect With Us:

FSC Approved

Copyright © 2024 Professional Flooring Supply.  All rights reserved.