Sub Image
Main Image

Uzin MK 1000

Single-component, silane-terminated polymer (STP) wood adhesive is solvent-free and water-free, delivering strong bonding for hardwood flooring installations. With moisture control up to 80% RH, it helps safeguard against environmental conditions.

Formulated for solid wood flooring up to 5” wide, it maintains flexibility while ensuring secure adhesion. It is also suitable for engineered wood flooring up to 9” wide, providing versatility for various installation needs.

  • Moisture control up to 80% RH
  • Approved up to 5” wide solid wood flooring
  • Engineered wood flooring up to 9” wide
  • Approved for use over radiant heat systems
  • Prefinished and unfinished engineered wood flooring
  • Solid tongue & groove strip and plank
  • Exotic species
  • Wood flooring on radiant heat systems
  • Wood flooring on most subfloors with adequate strength such as concrete, fortified gypsum, plywood, and OSB
  • For professional use only

195-255 sq.ft. per pail*

65-85 sq.ft per gal*

(see tech data sheet for details in coverage chart)

For 80% RH allowance

using B-11 trowel

195 sq.ft per pail*

65 sq.ft. per gal*



*At 70°F (21 °C) and 65% rel. humidity. Coverage is approximate and could vary depending on substrate porosity and the angle at which trowel is held. It is the sole responsibility of the contractor/ installer to determine the proper porosity of the subfloor, apply the proper amount of adhesive for the job conditions and ensure that all instructions, procedures and practices are strictly adhered to.

3 Gallons per Each

33 Each per Pallet