KE 39 TPS Transitional Adhesive
UZIN KE 39 is an acrylic polymer blend, firm-set transitional adhesive designed for the installation of resilient flooring and carpet tile, including LVT, LVP, VCT, vinyl sheet goods and vinyl-backed carpet tile. This advanced formulation provides sufficient green strength to hold the floor covering in place during installation and transitions to a firm set bond with excellent shear bond strength to minimize gap development. KE 39 TPS may be installed using a semi wet-set method for permanent installations or allowed to dry to a pressure-sensitive state for releasable installations. Suitable for use over porous and non-porous substrates, KE 39 TPS is applied by trowel or roller and firms as it cures for durability under heavy traffic and rolling loads. For interior use only.
4 Gallons per Each
48 ea per Pallet
- Interior use only
- LVP (Luxury Vinyl Planks)
- LVT (Luxury Vinyl Tile)
- VCT (Vinyl Composition Tile)
- Vinyl sheet goods
- Vinyl-backed carpet tile
- Cork underlayment and cork-backed flooring
- Properly prepared concrete, APA-rated plywood, terrazzo, ceramic tile, OSB, cement backerboard and gypsum
- Radiant-heated subfloors (surface termperature <85°F
- Transitional installation flexibility – Variety of applications
- High initial tack with firm bond development – Reduced slippage and faster installation
- Moisture tolerance up to 99% – Suitable for challenging environments
- Excellent shear strength – Prevents gapping
- Plasticizer and pH resistant – Long-term bond stability
- Spreads opaque white & dries clear – Visible chalk lines and finishes clean
- Apply by trowel or roller – Consistent coverage
- Low VOC content, <1g/L – Suitable for occupied & sensitive spaces
125-350 sq ft/gal (approx. 500-1,400 sqft/pail)*
*at 70°F and 66% RH. Flash times, open times, and working times are approximate and will vary significantly based on regional climate, ambient temperature, relative humidity, and substrate porosity
