Sub Image
Main Image

TAG Seal 3 Adhesive Residue Encapsulator


TAG SEAL 3 is a fast-drying, solvent-free solution designed to encapsulate old adhesive residue and cutback stains while improving adhesive bond performance. Ideal for both remodels and new construction, it ensures a quick return to service in residential and commercial settings

• Not for use to encapsulate asbestos

• Not for use when moisture exceeds 3.0% per ASTM F2659, or Relative Humidity of concrete substrate exceeds 90% (ASTM F2170)

• Not for use where hydrostatic pressure exists

• Do not use if substrate pH is greater than 11.0 or below 7.0

• Concrete substrate must be a minimum of 5° F above dew point

• Ambient conditions must be between 60°-90° F – 30-65% RH

• Extreme ambient condition changes will affect the performance quality of the installation

• Do not install over chemically abated substrates

• Do not allow product to freeze

• Do not use with dimensionally unstable floor coverings

• Do not use over concrete substrates which have been treated with silicates, either topically or entrained

• Do not use TAG SEAL 3 with any other primer or sealers

• Not for with Polyurethane adhesivess


Up to 360 sf/gallon

4 Gallon per Each

48 Each per Pallet