Sika Tile 910 Floor Mud 50 lb. Bag
PROFESSIONAL-GRADE PORTLAND CEMENT MORTAR BED UNDERLAYMENT
SikaTile®-910 Floor Mud is a factory-premixed blend of specially grounded sand and Portland cement for thick-bed mortar installations. SikaTile®-910 Floor Mud can be used to flatten, level or slope over existing substrates before the installation of tile and stone.
6.25 sq.ft. at 3/4” thickness per 50 lb. bag
Easy to install by screed or trowel
Excellent bond to concrete and wood with minimal preparation
Trowels to a smooth, uniform finish
Cures in 24 hours
Crack resistant and fire retardant
Good thermal and acoustical insulating properties
Excellent adhesion to most common substrates
Use as a dry pack mix
May be installed from 1/2 to 2”
Easy to mix with the addition of water. For increased performance and reduced porosity, mix with Sika® Latex R admixture
1 50lb Bag per Each
48 Each per Pallet
SikaTile®-910 Floor Mud as a bonded or non-bonded, conventional thick mortar bed on horizontal surfaces
- Provides a solid foundation substrate prior to the installation of tile and stone
- Float shower pans and dry pack mixes
- Can be directly bonded or used as a detached mortar bed over a waterproofing membrane
- Both residential and commercial applications in dry and wet areas
- For increased performance and reduced porosity, mix with Sika® Latex R admixture
SikaTile®-910 Floor Mud can be installed in most interior and exterior residential and commercial installations on floors over the following recommended substrates:
• Brick Masonry
• Concrete
• Exterior Grade Plywood
• Gypsum Drywall
• SikaLevel® Products
Interior Use Only.
